HybridDash
Everything described here for HybridDash also applies to HybridDash Pro.
#First launch
- Pair the adapter in Android's Bluetooth settings (see Connecting the adapter).
- Open HybridDash and go to settings → OBD adapter. Grant the Bluetooth permission if asked.
- Pick your adapter from the paired devices. The app connects and the dashboard starts showing values.
The connection state is always visible: disconnected, connecting…, connected or an error message.
The paired-device list starts collapsed: expand it to select your adapter. Refresh reloads the list; reconnect adapter reconnects the selected device.
#The phone dashboard
On your phone, HybridDash includes all four dashboard layouts: Classic (with or without side clusters), Motorsport, 1980s Retro LCD and Telemetry (Modern and Simple), plus dense view.
- Trip: distance, trip-average km/l, share of the trip driven electric (EV), instant consumption, fuel level.
- Hybrid battery & electric: state of charge (SOC), power, voltage, current, HV battery temperature and fan, MG1/MG2 torque and RPM, inverter temperature, pedal EV margin.
- Engine, braking, 12 V & tyres: S0–S4 warm-up stage, thermal power, engine RPM, torque and load, coolant and outside temperatures, requested/applied braking, brake cylinder pressure and braking state (REGEN, MIX, HYD), 12 V battery and TPMS tyres.
Consumption defaults to km/l; you can select another unit in settings. With no fuel use you see EV; when stationary, --.
Tap the dashboard to switch to the dense view: HybridDash shows over 35 Base values; purchasing HybridDash Lab (or using Pro) adds the 24 advanced diagnostic signals and the “Other” section, closed by default.
Full-screen picker: dashboard map, live values grouped by topic and the boxes where each value is already used. Open it by holding a box on the phone or selecting it in settings → instrument screen.
A value shown as “--” is currently unavailable.
HV battery temperature: shows the highest reading among available temperature sensors on the vehicle. On cars that provide only a single sensor, that reading is shown.
#HybridDash on Android Auto
Connect your phone to the car: HybridDash appears among your Android Auto apps. It shows a grid of values you can read at a glance, with 12 positions organized across two pages (6 values on Page 1 and 6 on Page 2).
To choose the values for each page, go to settings → instrument screen and tap a position to change its value from all available metrics (over 35 values in Base, or the full catalogue with HybridDash Lab).
HybridDash Pro instead draws the full graphical dashboard on Android Auto (Classic, Motorsport, Retro LCD, Telemetry and scrollable dense view), including split screen.
While driving, the Android Auto grid is read-only: you can only switch pages.
HV battery temperature: shows the highest reading among available temperature sensors on the vehicle. On cars that provide only a single sensor, that reading is shown.
#Measurement units
In settings → units, choose consumption, distance/speed, temperature and power units. Defaults are km/l, km, km/h and °C. Options include L/100 km or mpg (UK or US), miles and mph, °F and kW/CV. Each quantity displays only the selected unit; display conversions do not change the original stored data.
#HybridDash Lab: offline trip analysis
HybridDash Lab turns every recorded session into a comprehensive interactive report that works completely offline with no network connection required. Open it from Settings → Trips & Lab → HybridDash Lab or by tapping the dedicated link under the end-of-trip summary.
The report provides deep telemetry insights into your vehicle:
- Trip Overview: observed distance, estimated average fuel economy (km/l), top speed, actual moving time and stops.
- Synchronized Time Charts: second-by-second plots of speed, engine RPM, MG1 speed and torque, electrical power, temperatures and battery voltage.
- Observed Events: interactive list of engine starts and phase transitions: tapping an event zooms into the exact seconds before and after.
- X/Y Correlation Chart: scatter plot comparing any two metrics (e.g. speed vs engine RPM) colored by a third parameter (e.g. engine load).
- Distribution Histograms: frequency distribution of speeds and loads throughout the journey.
- HV Battery Cells & Blocks: detailed comparison of all 48 high-voltage battery cell readings (min, mean and max recorded during the trip). This is an objective reading comparison and does not constitute a battery health (SOH) or capacity certification.
- Export & Share: save as a standalone offline HTML report to open on your desktop, share directly, or export raw session data to CSV.
HybridDash Lab is included in HybridDash Pro and available as a one-time separate purchase (€2.99) for Base editions.
#End-of-trip summary
At the end of a trip HybridDash can show a notification with a summary:
- distance and duration, average and top speed
- average km/l and litres used
- share of the trip driven electric, by time and by distance
- maximum engine rpm and coolant temperature at the start and end of the trip
- hybrid battery charge: minimum, maximum, final value and change
- 12 V battery voltage, with a warning if it's low
Turn it on or off in settings → trips, where you can also send a test notification with sample data. Received summaries stay available in trip report notifications history.
#Trip sessions and CSV export
Every trip is recorded on your phone as a session. In settings → trips → trip sessions you'll find the list with date and duration; from there you can:
- export a session as CSV and share it with the app you prefer (e-mail, Drive, a spreadsheet…)
- end the session in progress
- delete one session or all of them
Trips older than 30 days are deleted automatically. Export only happens when you ask for it.
#Automatic door locks
HybridDash can lock and unlock the doors for you. It's a paid feature with a free trial.
- In settings → door lock management tap enable door locks, read the notice and accept it.
- Choose how to lock:
- automatic speed-based locking: doors lock when you exceed the chosen threshold (10, 15, 20, 25 or 30 km/h);
- lock on shift to D: doors lock as soon as you shift from P to D. Not available while speed-based locking is on.
- Optionally turn on unlock on shift to P: doors unlock when you shift to P, only with the car stopped.
The same section has lock now and unlock now buttons and shows the current door status.
If the connection to the adapter drops, doors are unlocked only if the car is stopped in P. While driving they stay as they are.
See also Free trial and purchase and Safety.
#Fine tuning: consumption, speed, pedal and brakes
Open settings → advanced → fine tuning for pedal calibration, tank capacity, brake-sensor zero, speed and fuel-consumption correction. Check the car selected at the top: values are saved per car.
To calibrate consumption, fill up and reset the counter on the calibration screen. At the next fill-up, enter fuel added and distance driven, calculate the proposed factor, then save and reset the counter.
For speed, choose a fixed or percentage correction. It ramps in between 0 and 20 km/h and stays zero at a standstill. By default it affects only the display; you can extend it to logs and trip statistics.
Brake-sensor zero is learned automatically. Use manual calibration only if pressure does not return to zero with the pedal released.
#Diagnostics
settings → advanced → diagnostics
The diagnostics section in settings helps you understand what's going on when something doesn't work:
- adapter model, firmware and support for fast (ST) commands;
- gear lever position as read from the car;
- target and measured reading rate (if it's lower than expected, «degraded» appears);
- values the car doesn't return, which are requested less often;
- when HybridDash was last seen on Android Auto and at what resolution.
#Theme and Stable numbers
In settings → instrument screen, below app style, choose Auto, Light or Dark. One theme applies to the phone and Android Auto: Auto follows the phone system or the car infotainment theme; Light and Dark force the choice on compatible dashboards.
Stable numbers, on by default, reduces small changes in displayed digits. In settings → advanced → performance → number update rate, choose 5, 10, 15, 20, 25, 30 or 60 updates per second, or Unlimited. The default is 20. This is a global setting and needs no adapter reconnection.
The filter affects displayed numbers. Bars, OBD readings, logs and trip statistics keep the original data. Rapid changes can look more gradual; switch Stable numbers off to display each reading immediately.
#Separate settings for each car
The car is recognised by its VIN. Startup dashboard, scenes in the tap cycle, background, tiles, Telemetry options, fine tuning and extra Maximum performance readings are saved for each car.
When disconnected, select a stored car in settings. All cars applies choices to stored cars; learned EV thresholds and glide points stay individual. Rename a car in advanced → OBD requests.
#Scanning your car
With the car stationary and in READY, open settings → scan this car → car scan. The app tries catalogue readings and stores those available for this car. You can also use the first-connection prompt or the missing-data notice on the dashboard.
You can cancel: an incomplete scan saves no profile. Repeating it replaces this car’s profile without clearing manual exclusions. Delete saved profiles in advanced → car scans.
Advanced discovery is on the same “Scan this car” page, with the wizard and arbitrary request tool. The old discovery button below the dashboard has been removed. Data availability depends on the car; scanning cannot guarantee a response from every sensor.
#Packet reading and Maximum performance
Open settings → advanced → performance. Packet reading, on by default, groups values in requests to compatible control units. Keep automatic fallback to classic reading enabled to use individual requests when packets fail. Changing these options reconnects the adapter.
Maximum performance, off by default, prioritises fast readings. When enabled, choose extra groups per car: brake control unit, wheel speeds, door locks, lever from the brake unit, slow temperatures, cabin/HV battery, fuel and tyres. Every change reconnects the adapter.
Read the effect beside each group and the measured rhythm while connected. Brake-unit and wheel-speed readings can slow it considerably. Use defaults or minimum to restore a preset. Without the brake unit, pressure is derived from brake torque and may differ from a direct reading.
Adapter timing choices are fastest (default), fast and standard. Actual reading speed depends on the car, adapter and enabled readings; displayed-number update rate is a separate setting.
#OBD requests: history, exclusions and quarantine
In settings → advanced → OBD requests, review responses and history per car. Excluded by you and automatic quarantine have separate subpages; automatic abandonment and requests silent during scanning remain distinct.
Exclude a request for the recognised car or re-enable it from the next trip. Before confirmation, the app lists affected values: excluded readings show --. Changes wait for the next trip; a brief Bluetooth reconnection does not apply them immediately.
History remains available with the adapter off. A new scan does not clear exclusions. Use these tools only when you understand which readings you are disabling.
#HV battery diagnostics
In settings → advanced → diagnostics → HV battery diagnostics, request the data available for your car: cells or blocks, resistances and temperatures. Summaries show reading count, minimum, maximum and spread; expand the details to see individual elements.
Continuous monitoring while driving of NiMH blocks and resistances is off by default. When enabled, these readings are requested at least 60 seconds apart. Availability and element counts depend on the car and scan profile; missing data is not a fault diagnosis.
#Finding advanced tools
In settings → advanced, find saved scans, OBD requests, performance, fine tuning, diagnostics with HV battery data, and PID definitions. Scanning and advanced discovery open from “Scan this car”.
PID definitions can be edited, exported and imported (5 MB maximum). Export a copy before editing: incorrect formulas produce incorrect values.
HybridDash Pro
The complete version, sold on this site and installed from the .apk file. It contains everything in HybridDash, plus the following.
#Installation and updates
- After purchase you receive an e-mail with the download link. Open it on your phone and download the .apk file.
- Install the file with KingInstaller and Shizuku (or with the direct method for OPPO, OnePlus, and realme), following the guide below: this is the required procedure to install Pro.
- To see it on Android Auto: open the Android Auto app on your phone, tap Version 10 times to enable developer settings, then turn on Unknown sources in the developer settings menu.
To update, download the file again from the link in your purchase e-mail and install it over the existing version: your settings and trips are kept. Version 1.x updates are included. Updates are installed with KingInstaller as well.
HybridDash and HybridDash Pro are separate apps and can be installed side by side on the same phone.
#Installing Pro with KingInstaller and Shizuku
This is the required procedure to install and update HybridDash Pro: KingInstaller (v1.9) installs the .apk file with Shizuku's permissions, that is through Android's «wireless debugging», with no cable and no computer. It needs Android 11 or later and a Wi-Fi network.
Do you have an OPPO, OnePlus, or realme phone? Click here for the dedicated procedure (without Shizuku)
On devices running ColorOS, Realme UI, or OxygenOS, KingInstaller features a direct mode that does not require Shizuku or wireless debugging:
- Download the HybridDash Pro .apk file onto your phone from the purchase link in your e-mail.
- Install and open KingInstaller (version 1.9). Shizuku is not needed on these devices.
- In KingInstaller tap Select file and choose the downloaded .apk file.
- Check Enable if you use Oppo, Realme or OnePlus phone. Note: this mode excludes Shizuku, do not enable both at the same time.
- Tap Install as King.
- When prompted by the system to complete the action, select the Default Package installer (the standard Android/Google installer, not the device manufacturer's security scanning app).
- Verification: go to Settings → Apps → App management → HybridDash Pro and scroll to the bottom: the install source must show Google Play Store.
Compatibility note: if installation is blocked due to permission restrictions on certain firmware versions, go to Settings → System → Developer options and enable Disable permission monitoring.
- Download the HybridDash Pro .apk file on your phone from the link in the purchase e-mail. It stays in the Downloads folder.
- Install the Shizuku app from the Play Store. Also install KingInstaller (version 1.9).
- Turn on developer options: Settings → About phone, tap Build number 7 times and enter your PIN if asked.
- Connect the phone to Wi-Fi. Go to Settings → System → Developer options and turn on Wireless debugging; if Android asks to allow it on this network, confirm.
- Open Shizuku and choose Start via wireless debugging (or «Pairing»). When Shizuku asks, open Developer options → Wireless debugging → Pair device with pairing code.
- A 6-digit code appears. Type it into the Shizuku notification (tap the notification and use the reply field) and wait for «Pairing successful».
- Go back to Shizuku and tap Start. When you read Shizuku is running at the top, the hard part is done.
- Open KingInstaller, go to its settings and choose Shizuku (ADB) as the install mode. When Shizuku asks for permission, tap Allow.
- In KingInstaller pick the HybridDash Pro .apk from the Downloads folder and tap Install. When it finishes, the app shows up among your apps.
- To see it on Android Auto the step in «Installation and updates» still applies: turn on Unknown sources in Android Auto's developer settings.
Shizuku stops when you restart the phone: to install an update, repeat steps 4-7 (the pairing in steps 5-6 usually doesn't need to be redone). Menu names can differ a little between Android and app versions: look for the entry with the same meaning.
#Activating the licence
For Google Play purchases, use the same Google account and Restore purchase. For website purchases, enter the Lemon Squeezy key in the correct app, from settings during the trial or after reinstalling.
A direct licence allows up to two cars, recognised by VIN. If both slots are occupied, free one through activation management and try again. Internet is needed for activation and periodic checks: an activated car works offline for up to 45 days after the last successful check.
Simulation and replay of a recorded trip work without a licence too, so you can try the app before connecting it to the car.
#Pro dashboards and dense view
HybridDash Pro has four dashboards: Classic, with a ring speedometer, energy flows and clusters; Motorsport, with an LED bar; Retro LCD, inspired by the 1980s; and Telemetry, Modern or Simple.
In settings → instrument screen, choose the startup dashboard and scenes to cycle through by tapping, including dense view. The picker uses two columns in portrait and four in landscape. Dashboards adapt to the phone and Android Auto split screen.
Dense view groups values into trip, HV battery, electric, engine, car and detail sections, including fuel system and tyres. In Pro you can scroll vertically on Android Auto too; essential sections come first. Available data depends on the car and enabled readings.
To customise a tile, hold it on the phone or select it in the settings diagram. The full-screen picker shows live values by category and where they are already used. Motorsport and Retro LCD keep English labels.
#Telemetry dashboard: Modern and Simple
In settings → instrument screen → Telemetry, choose Modern (default) or Simple, with the earlier design and its tile map. Options are saved per car.
Modern boxes: tap a box title in the settings diagram to choose a group, then edit individual slots. The four-slot top-left box accepts Classic clusters, including Tyres. Other boxes use triples: Temperatures, Engine, Battery, Electric, Auxiliary, Car, Trip or Fuel system. Tyres are offered only in the four-slot box.
Pedal: Modern defaults to a 100% range, or you can select 35% to 60% in 5% steps. The glide band and EV marker follow this scale; beyond it the bar stays full, while the number always shows the true pedal percentage. An EV threshold beyond the range is not drawn. Simple keeps a 0–100% scale.
Brake: both styles offer Regen / brake (default: green follows regeneration power, red with friction brakes) or Brake (pressure only: 0–5 bar in green, 5–30 bar in red). Since 1.4.0g the title also follows the mode, with a compact label in narrow spaces. Resetting slots keeps the brake mode, pedal range and selected style.
Other readings: engine power, HV current and battery power with a centred zero; Modern has four configurable motor-row slots. MG1/MG2 RPM and torque can be selected in Pro tiles. The MG1 reading on the C-HR remains unverified; without a response you see --.
Modern reflections: ON, 50% or OFF (default), on phone and Android Auto. Tyre sensors are numbered 1 to 4; these numbers do not identify wheel positions. Pressure and temperature depend on supported and enabled readings.
Telemetry remains in beta and has not been tested on Android Auto. Layout and legibility may need refinement; send feedback through the website’s bug report form.
#Braking display
The Pro shows when, on top of regenerative braking, the mechanical brakes (the pads) engage. In settings → instrument screen → brake management:
- red bar during mechanical braking: the power bar turns red when the hydraulic brakes engage;
- brake icon during mechanical braking: shows the brake symbol next to the bar;
- hydraulic brakes intervention threshold: the pressure, in bar, above which braking counts as mechanical (a recommended value is marked).
It helps you learn to brake while recovering as much energy as possible.
REGEN indicates energy recovery, including when coasting; HYD takes priority when friction brakes engage. Where available, the app compares requested and applied electric braking alongside pressure, speed and battery power. Other cars use the data they provide. REGEN/HYD operation verified in the car.
#The pedal bar: EV threshold and glide point
When the dashboard shows the accelerator pedal, the bar also tells you what the car will do if you press further. From foot off to full travel the pedal has four zones:
- regen: below the glide band the car recovers energy and slows down;
- glide: inside the band the car neither pushes nor recharges, it rolls with the engine off;
- electric: between the band and the EV threshold only the electric motor pushes, using the battery;
- engine: past the EV threshold the petrol engine starts.
EV threshold. A thin mark on the bar, a small triangle on the Retro LCD dashboard, shows how far you can press before the engine starts: below the mark the car tends to stay electric. The point changes with speed, battery charge and engine temperature, and from car to car, so the app learns it from your car by watching the engine starts. At first it uses a starting threshold taken from real trips; after about ten useful starts it switches to the learned threshold. The mark is always there, with no warning colours or messages. On the Motorsport dashboard, with the engine off, the LED bar at the top shows the pedal instead of the revs: the cyan LEDs fill up to the white threshold LED. You can also put the EV MARGIN value in a tile: the pedal left before the engine starts.
Glide point. A narrow band on the bar shows the pedal position where the car glides: engine off and electric motor neither pushing nor recharging. The band has three looks:
- outline: the target, where to bring your foot;
- filled: the car confirms, from the electric motor torque, that you are gliding right now;
- dashed: right now the target does not hold, for example downhill. The band stays where it is and goes back to an outline when you move the pedal or the readings agree again.
The Glide band appears between 20 and 90 km/h. The optimal glide point is calibrated and learned automatically by the app to match your specific car. When enabled, the pedal bar uses an expanded scale to make the glide threshold clear and effortless to maintain while driving.
Retro LCD dashboard. HV battery, fuel and pedal share three places: the centre vertical column and the two strips on the left. You choose them under Center vertical bar, Upper left strip and Lower left strip; if you pick an item already used in another place, the two swap. By default the pedal sits in the centre column, with HV battery at the top and fuel at the bottom. With the pedal in the column, the GLIDE light under the column comes on when the band is confirmed. As on the original, the dashboard labels are in English (PEDAL, GLIDE).
In settings → instrument screen, below the settings of the chosen dashboard:
- EV threshold on the pedal: shows or hides the mark on every dashboard (on by default);
- minimum battery charge: 35, 40, 45 (recommended), 50 or 55%. Below this charge the engine stays on to recharge and engine starts don't teach the threshold; it differs from car to car;
- reset learned threshold: forgets the engine starts learned for the last car connected, and the mark goes back to the starting threshold;
- Glide point on the pedal: on by default; off removes band, GLIDE light and expanded scale from every dashboard;
- reset learned glide point: the band goes back to the starting estimate for the last car connected.
Threshold and glide point are learned for each car and saved on the phone. In simulation and replay the app uses the starting values and learns nothing.
Telemetry uses its own pedal scale: see Telemetry dashboard: Modern and Simple.
#Vehicle background
Choose a background in settings → instrument screen → vehicle background, in the collapsible Classic section. The catalogue includes C-HR (also 2nd generation), Yaris, Yaris Cross, Corolla, Corolla Cross, RAV4 (also the new model), Prius, Auris, Lexus LBX and generic hatchback, saloon, sports car and SUV silhouettes, or no background. It is saved per car and is cosmetic: it does not change available readings.
#Simulation and replay
In settings → OBD adapter → transport the Pro offers three data sources:
- Bluetooth: the adapter in the car, for normal use;
- synthetic (no hardware): a simulated trip, to try the app and Android Auto without a car or adapter;
- replay (recorded log): plays back a recorded trip imported from a CSV file, with adjustable playback speed and loop.
#Door locks included
Automatic door locks are included in the Pro trial and permanent unlock. Accept the notice and configure the automations on their settings page; no separate door-lock purchase is required.
#Licence, price and discount if you already bought an app
HybridDash Pro costs €9.99 one-time, with version 1.x updates included and no subscription. The price includes VAT: at checkout you pay €9.99, with nothing added. Payment is handled by Lemon Squeezy, which issues the receipt.
If you already bought HybridDash, AutoLock or HybridDash Lab, we deduct what you already paid: email us at [email protected] with your order number and we will send you a discount code to pay only the difference (minimum €1).
Personal licence, valid for up to two cars. You activate it once in the app with the licence key you receive by e-mail (activation needs an internet connection).